| Integrated
Circuits |
| IC1 |
TL061 |
| IC2 |
LT1037 |
| IC3 |
SSM2142 |
| Resistors |
|
| R1 & 2 |
4.7Mohm (Yellow/Violet/Green + Gold on Beige Background) |
| R3 |
3.09Kohm (Orange/Black/White/Brown + Brown on Blue
Background) |
| R4 |
261ohm (Red/Blue/Brown/Black + Brown on Blue Background) |
| R5 |
365ohm (Orange/Blue/Green/Black + Brown on Blue Background) |
| R6 |
100ohm (Brown/Black/Black/Black + Brown on Blue Background) |
| Variable
Resistors |
| VR1&2 |
200ohm 3/8" Square Trimmer |
| Capacitors |
| C1 to 6 |
0.1uF Monolithic Protection Capacitor |
| C7&8 |
1.0uF 50V Bi-Polar Electrolytic Capacitor |
| Diodes
& Lamps |
| D1 |
1N914 |
| LED1 |
Green low-current LED |
| Lamp 1 |
#327 Incandescent Bulb |
| Hardware |
| 1 |
Pre Drilled Case with Battery Clip and 4 Screws |
| 1 |
Pre-cut Label Insert |
| 1 |
2" Piezo Horn |
| 1 |
Custom Printed Circuit Board V3,2 |
| 3 |
8 Pin DIP Dual wiper IC Sockets |
| SW2 |
Black Switch on-(on) Momentary Action with Locking Nut |
| SW1 |
Black Switch on-on Latching Action with Locking Nut |
| 1 |
Black LED holder with locking ring |
| 2 |
Panel Mount Male XLR Connector |
| 1 |
Panel Mount Female XLR Connector |
| 11 |
Black Philips Pan Head bolts |
| 10 |
Self Locking Nuts |
| 1 Feet |
Multicolored ribbon cable |
| 1 |
Small Piece of Non-Slip Matting |
